● The edge of the panel has a tiny R Angle, which
    does not produce bevel chamfering and does
    not break the letters  
●For the word shell polished by hand with Angle
  grinder.Obvious chamfered shape appears at
  the border position of the panel and the sideband,
  destroying from and finished product effect
Micro R angle
Chamfer

After polishing the word shell full round more aesthetic feeling, in line with Hong Kong seiko standard.

● The letters shell is placed on the plane, and the grinding
    head rotates around the fixed pint to carry out translations
    operation at all angles.The letters shell gets stable support,
    the polishing effect is stable and outstanding , the yield is  
    very high
● When holding the Angle grinder in hand,the hand cannot
    be effectively supported because it is suspended in the
    air.It is easy to cause uneven damage to the word shell
    when grinding, resulting in a higher rejection rate

According to the actual use calculation of several users, 0 basic grinding workers only need 20 man-hours to start the work, 7 days or so can be more skilled work, 30 days to carry out efficient grinding work

It only takes 30 days for basic staff to work efficiently from the beginning, and the polishing efficiency has been increased by 30% compared with that of finishing in the polishing process, and by 40% compared with that of finishing in the polishing process.In addition, the labor cost has been reduced and the work efficiency has been significantly improved

● As the grinding head rotates at a fixed point and cannot be moved, the word
  shell is placed on the table, and the hand only moves the word shell  in directions,
  so there will be no accident such as grinder injury
● LARGE OPERATING WORKTOP
● ADJUSTABLE WORKTOP
● 4 SETS OF GRINDING HEAD SETTINGS
● POLISHING PEN FUNCTION
● DEDUSTING DEVICE CONNECTION
Extra large worktop design 1200mm*800mm, capable of large size word shell grinding processing

Loss with the grinding head, the worktop height and tilt angle can be adjusted electrically with one key, no need to adjust manually, saving working hours

Four groups of motors drive four grinding heads respectively, one key lift work

Add the function of polishing pen, it is easy to polish the center and the position of the inner corner, which is flexible and easy to use

Dust removal device can be directly incorporated into the dust collection device pipe network to create a clean ecological environment

Users can also change other types of grinding head according to their needs
AIR SUPPLY

POWER

GRINDING WORKTOP

PEED OF STRAIGHT GRINDER

WEIGHT

0.6 m3/min
AC220V // 50Hz // 800w
1200×800
9000~26000r/分钟
300kg